dc micromotor - FAULHABER - DC Motors & Micro Drive Systems
used in these business-critical machine components. The high basic cycle, as dc micromotor dc micromotor - FAULHABER - DC Motors & Micro Drive Systems is standard in electronics manufacturing, calls for drives with strong performance and torque. In spite DC Motors, Brushless Motors, Brush DC Motors, Precision Gearheads ... of the high level of dynamics, the positioning must be perfect at all times. The actual process of aligning and clamping the wafer in the dc micromotor holder does not require
excessive power, but it is just as
critical during the positioning phase. After all, the wafer must lie exactly in the center in order to ensure that
as much of the surface as possible is utilized. Finally, the screws of the frame must not only
be dc micromotor inserted exactly at the right position, they must also
be turned identically so that deviations caused
by frame displacement or screw heads that do not sit squarely can be avoided.
Flexible dc micromotor drives
INGENIA uses wear-resistant electronically commutated DC motors in order
to meet these demanding requirements. The EC motors developed by the dc micromotor micromotor specialist FAULHABER are the perfect solution, boasting an extensive range of control and gearbox technology. Motors of the 3056 Production Series are ideal for machine components with above-average speed dc micromotor and torque requirements. At a mere 30 mm diameter and 56 mm length, these miniature drives develop a continuous torque of up to 21.5 mNm (stall torque up to 100mNm), at an output power of 49 W. The micromotors are available for supply voltages of 12, 24, 36 or 48 VDC. The speed can be adapted by deploying optional gearheads of the 30/1 or 38/1 Series. The dynamic little powerhouse can be controlled through the micromotor’s analog Hall sensors and MCBL 2805 motion controller, which has been tailored specifically to this state-of-the-art range. The larger motors of the 3564 Type Series can optionally be deployed with integrated motion controllers. This enables a very compact drive of 35 mm diameter and 83 mm total length – including the controller. Despite this compact size, the EC micromotor achieves a power output of 70 W and a peak torque of 160 mNm (continuous torque 50 mNm). Here too, matching gearheads are available to adjust the speed and torque in line with requirements.
In the 3564 K 024 BC model, the electronically commutated servomotor integrates a high-resolution encoder and a programmable motion controller with the help of a high-performance 16-bit controller. Velocity regulation from 10 to 10,000 rpm, velocity profiles such as ramping, triangular, trapezoidal or positioning movements with resolutions up to 1/1000 revolutions are possible. Reference marks and limit switches can also be checked. A self-protection against excess temperature, overloading or excessive voltage during generator operation is integrated. In addition to autonomous deployment, an RS232 interface also enables externally controlled usage. Several motors can operate on one interface by means of addressing. A multiplexer board is available for this purpose.
The interaction of flexible drive concepts and pioneering system solutions also provide a solid foundation for reduced production costs in electronic fabrication, while simultaneously improving manufacturing quality. State-of-the-art drive solutions ensure fast and safe handling at all times.
High-Traction Sewer Robot with Compact DC Motors
compact, strong and agile UNDER ground
Thousands of miles of underground pipes are responsible for handling important tasks. They have to
- dc micromotor
- shaft encoder
- encoder
- micro system
- servomotor
dc micromotor shaft encoder encoder micro system servomotor step motors drive system small motors ec motors faulhaber
